Belt Alignment Switch STAINLESS STEEL HEAVY DUTY 35mm Long Roller

Belt Alignment Switch STAINLESS STEEL HEAVY DUTY 35mm Long Roller

Approvals

The Python range of Conveyor Alignment Switches are housed in a rugged 316 stainless steel body.

The roller is also built from stainless steel and has a 35mm diameter and length of 230mm. It is designed for use in heavy duty areas to maintain conveyor belt alignment and prevent belts running out of alignment and causing damage to both the line and products.

The steel roller of the switch is placed near to the running edge of the conveyor belt such that deflection of the roller and arm will cause activation “tripping” of the internal contacts of the switch. Each switch contains two sets of contacts, one which indicates a warning signal (for maintenance purposes) and the other a stop signal, disconnecting the outputs and stopping the belt.

Features:

  • Contacts: 2NC 2NO
  • Supply: 24V or 110V or 230V
  • Indication: With or without LED
  • Conduit Entry: M20 or 1/2″NPT fitting
  • Operating Torque: 3.0 – 5.0Nm
  • Warning Signal: 10 – 18 degrees
  • Stop Initiated: 15-35 degrees
  • Ingress Protection: IP67
  • ATEX Versions Available
Product Group Part No. Description
Belt Alignment Switches 501005 Belt Switch SS 35mm Roller Long M20 2NC 2NO
Belt Alignment Switches 501006 Belt Switch SS 35mm Roller Long 1/2″ NPT 2NC 2NO
Belt Alignment Switches 501007A Belt Switch SS 35mm Roller Long M20 2NC 2NO 24v LED
Belt Alignment Switches 501007B Belt Switch SS 35mm Roller Long M20 2NC 2NO 110v LED
Belt Alignment Switches 501007C Belt Switch SS 35mm Roller Long M20 2NC 2NO 230v LED
BeltAlignment Switches 501008A Belt Switch SS 35mm Roller Long 1/2″ NPT 2NC 2NO 24v LED
Belt Alignment Switches 501008B Belt Switch SS 35mm Roller Long 1/2″ NPT 2NC 2NO 110v LED
Belt Alignment Switches 501008C Belt Switch SS 35mm Roller Long 1/2″ NPT 2NC 2NO 230v LED
Belt Switches 501051 Belt Switch SS 35mm Roller Long M20 2NC 2NO EX 3m Pre-wired